NorEast Fishing Forum banner
1 - 3 of 7 Posts

· Registered
Joined
·
58 Posts
Discussion Starter · #1 ·
I know tons of secrets for modifying lures...I guess once a week i will post em.


To me ive always lived and died by redfin, bombers and modified javelins.


For redfins I drill a small hole in the belly and add some small bebbies inside the lure. 3 to 4 beebies work best. I then take a plastic paint brush, (i bought hundreds in bulk for about 30 bucks). Wedge its tapered shaft into the drilled hole until it creates a seal. I then take a some crazy glue and secure it. Then i file it down and sand it flush. I then coat the entire area thing with crazy glue. I can cast these things a mile now, they still float. I control the eye on the front of the plug to make sure that it gets the desired depth i want.

You can also substitute the beebies for bunker oil.

Yozuri is overpriced eye candy in my opinion attempting to attract the angler moreso than perhaps the fish.

Just my opinion :-D. Maybe i will give one a shot.
 

Attachments

· Registered
Joined
·
58 Posts
Discussion Starter · #3 ·
Try the beebies used for a beebie gun. You can get them from any store like K-mart etc. with the bombers..use 4.

If you want to test them out try this. Fill them with about 4 beebies and put a piece of clay over the hole you drilled. Fill a bucket with water. The lure MUST float. Make sure that about 1/6th of the lure is floating. It will have more boyancy when it hits the salt water.

Also the beebies add a sound to the lure. Granted not every lure will work perfectly on your first try, so experiment with those odd colors or beaten ones first. It will lose at most say about less than 5% action but gain about 30% on your cast.
 

· Registered
Joined
·
58 Posts
Discussion Starter · #6 ·
Okay, im using the 5-6 inch redfin. When you talk about the classic v motion on the surface your talking about the jointed redfin? or are you just reeling the lure in at a lethargic pace?

I load the redfin up with 3-4 beebies...

I never work single piece redfins on the top. I use jointed redfins and bend the eye down. So i assume that if your using single piece redfins your bending the eye down as well. I still don't like using redfins on the surface and next friday I will tell ya why theres a better substitute :-D.
 

Attachments

1 - 3 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top