[615134]

I have a small pinole leak in a flexable part of my waders. Any confident advice on how to fix them so that I won't have to worry about seepage?

 

[Hunt n' Fish]

I use hot glue on my canvas covered rubber waders. I haven't had a leak from a fixed hole yet and they take some abuse while duck hunting.

 

[seaslug44]

Five years ago I used marine epoxy on the innerwall, the kind that comes in two tubes (one for the resin and one for the hardener). It hasn't leaked since.

 

[Jaiem]

Aquaseal should do it. But if it's in the flex part of the wader sooner or later the harder patch spot will cause a stress point and the material will fail around it. It's an imperfect solution but theres little to be done.

Jaiem
ArtsNFlies.com

 

[Steve20]

How about melting a rubber worm from your tackle box and cover the area when the rubber is pastable..