Joined
·
10,967 Posts
Hi Steve,
I do not use lacquer thinner at all. So I have not experienced this. It must be the type of epoxy finish they use and lacquer thinner has the power to break it down.
I use 91% isopropyl alcohol to clean everything. I do use denatured alcohol to clean color sealer/preserver from ends of wraps before last coat of finish. Very seldom do I use color sealer/preserver.
I try to use the least lethal cleaner that I can.
I made an ice stick into a flounder rod. Can't wait for march 16, opening of flounder season to put it to the test. It should produce a few chuckles. The blank is chartuese in color. A 1 1/2 lb flounder should be a blast on it.
Take care,
Capt Neil
Have Fun Fishing. Capt Neil
Custom Fishing Rods by Captain Neil
I do not use lacquer thinner at all. So I have not experienced this. It must be the type of epoxy finish they use and lacquer thinner has the power to break it down.
I use 91% isopropyl alcohol to clean everything. I do use denatured alcohol to clean color sealer/preserver from ends of wraps before last coat of finish. Very seldom do I use color sealer/preserver.
I try to use the least lethal cleaner that I can.
I made an ice stick into a flounder rod. Can't wait for march 16, opening of flounder season to put it to the test. It should produce a few chuckles. The blank is chartuese in color. A 1 1/2 lb flounder should be a blast on it.
Take care,
Capt Neil
Have Fun Fishing. Capt Neil
Custom Fishing Rods by Captain Neil
