NorEast Fishing Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
2,848 Posts
Discussion Starter · #1 ·
Would love to get some ideas as to how you set up your kayaks for fishing, photos would be even better. I drilled a hole and inserted a poleholder so I have a place to stick pole while I am peddeling, but I am sure you guys have come up with a lot of other imporovements and I would love to hear about them or see them.
 

·
Registered
Joined
·
295 Posts
there are alot things you can do, I am working on site will show all the rigging options, but here is a rigged kayak for to look at. I have a some more that I will post as I find them, I also have page of all the different kayak rod holders-if you email me I will send it to you, it wont upload on this page.

[email protected]
 

·
Registered
Joined
·
315 Posts
A lot depends upon your kayak. If you have a SOT you can buy a seat that has built in rod holders. I reccomend these types of seats to beginners so they can get some on water experience before they commit to drilling holes.

Another consideration is the type of rods you fish with. Most aftermarket rod holders will accomidate spin and conventional outfits but not fly rods. So if you're a fly fisherman you need to get one that will do the job. Scotty makes a specific fly rod holder that will hold any rod. The RAM117 will hold fly rods with a fighting butt. These types of rod holders; RAM, Scotty, Roberts, etc. sit above the kayak. Then there's the type that are mounted in the kayak and a significant hole needs to be cut. they cme in straight and angled designs and each has its appropriate uses.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top