NorEast Fishing Forum banner
1 - 1 of 2 Posts

· Registered
10,661 Posts
Hi Steve,

Are all the components in good shape, not damaged?

With out seeing the rod and assuming all is in good order I would take rod in shower and wash it in warm water(using soap and face cloth). Rinse good and dry. Let sit a day.

Spray Pledge (furniture polish) on a soft cloth and wipe it all over the rod. This will bring shine back if finished is in good shape.

If the finish is in bad shape I would wipe the rod down with 91% isopropol alcohol. Light brade the wraps with a scotch pad(about 400-600 grit) and clean again with alcohol. Then apply a coat of epoxy finish to the wraps and blank area if need be. Let dry for several days and then apply a coat of wax to the rod.

You can call me or email me if you need more info.

Capt Neil

Have Fun Fishing. Capt Neil
Custom Fishing Rods by Captain Neil
1 - 1 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.