NorEast Fishing Forum banner

Outboard Engine Problem, Help!!!

1114 Views 12 Replies 7 Participants Last post by  happyhrs
OK, I need some help. I have a 21 ft Seaswirl with a Johnson 130 outboard. I was out fishing on Saturday, everything was fine. I stopped on the way in to make a few casts, and when I went to start up again, nothing. I eventually had to get a tow from SeaTow. (Thank God for tow insurance). I can't figure out what is wrong. I get absolutly nothing when I try to start the motor. All of the other electrical systems are fine. I don't believe it is the starter, or the batteries, nothing happens at all when I turn the key (no clicking of the starter, just silence). All of the wireing looks fine, I checked the connections to the battery, and they are fine. My guess is either a simple loose wire that I haven't found, or possible a problem with the shifter.
Any ideas would be greatly appreciated.
1 - 1 of 13 Posts
enguine probs

I would check the lanyard cut off device, & make sure it is in neutral try turning the key & rockin the shift lever back & forth. I was once towed back to captree from FI inlet at night only to find out that my cut off lanyard was off...
1 - 1 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top