NorEast Fishing Forum banner
1 - 5 of 5 Posts

· Registered
Joined
·
19 Posts
Discussion Starter · #1 ·
was looking at this blank last week for bass and blues seems like it has some backbone but kinda wippy on the tip was wondering if anybody has this rod and their opinion please Thanks Don
 

· Registered
Joined
·
19 Posts
Discussion Starter · #4 ·
thanks capt i decided to go with the 9ft ron arra i might try the rubber shrink wrap grips can this material go directly on the rod or does cork need to be under the shrink wrap also what size reel seat would i need for this size rod i will be using a vs150 and like fugi reel seats thanks Don
 

· Registered
Joined
·
10,661 Posts
surfratny

Hi,

You csan install the shrink tubing dierctly to the blanks or over a grip.

If you are going to the NY Sportfishing Federation Show at Freeport this weekend stop by our booth and I will show you how I do it. I will have a rod with it installed.

A # 22 reel seat should be fine.

Capt Neil

Have Fun Fishing. Capt Neil
Custom Fishing Rods by Captain Neil
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top