NorEast Fishing Forum banner
1 - 17 of 17 Posts

· Registered
Joined
·
81 Posts
Discussion Starter · #1 ·
Hello all I just wanted to say I met with Kil today and the man is truly a gentleman. He opened his shop for me and we spoke of lures techniques and he even showed me how to tie one knot i was unfamiliar with. We as a fishing community are blessed to have him in our ranks. Thanks Bob
 

· Registered
Joined
·
12,251 Posts
Bob,
Thanks for your kind words.
let me see your secret fluke rigs when you come to my shop.
I had another customer this evening and he told me about secret bucktail for fluke which worked so good this year, but most of them couldn't find where to buy as guys who are using keep it as secret. :)
 

· Registered
Joined
·
12,251 Posts
kringo64 wrote:
Please let us all know what these teasers are and where to buy some, sharing info is what we are all about at Noreast, right.....KRWhile I have obligation to share any information with other members, I also have obligation not to leak any information when they asked not to. :mad:
To leak or not, that is the question. :)
 

· Registered
Joined
·
12,251 Posts
SwellRider wrote:
You need to come down to North Carolina now and catch Fluke and Sheepshead...All these fish were caught behind my house in the inter coastal... through alittle Gag Grouper fishing in and you'll have a cooler full... Ken
Nice cathces, Ken. I will go down to NC just for inshore fishing like fluke, ribbonfish, sheepshead, sea trout or king mackerel.
Ken, I need your favor. Next time please post a picture of a few nice fishes instead of lots of fish. Some jig fishermen easily get offended by just seeing pile of fish as you experienced last time.
 

· Registered
Joined
·
216 Posts
that guy the last time just wanted to start trouble... I know what your saying though.. The flounder and sheepshead fishing behind my house is very good at times...These are both great eating fish and nothing ever goes to waste. Last weekend when I was clean fish I had a chinese guy fron Queens on the trip and he was cutting the porgies and Vermillion Snapper up for sushi..Tasted Great. Ken
 

· Registered
Joined
·
196 Posts
NOT TOO LEAK!!!!

KIL

As much as I would like to absorb as much info as possible, I would not want you to compromise your trust with your customers. However, any tid-bit for a Fluke fishing nut case like me would be appreciated. Only do what you think is right, no hassles from me. Good luck with your new shop......Kevin R
 

· Registered
Joined
·
12,251 Posts
kringo64 wrote:
KIL

As much as I would like to absorb as much info as possible, I would not want you to compromise your trust with your customers. However, any tid-bit for a Fluke fishing nut case like me would be appreciated. Only do what you think is right, no hassles from me. Good luck with your new shop......Kevin R
Thanks. You releave me. :) I sent you a PM.
 

· Registered
Joined
·
3 Posts
KILSONG wrote:
kringo64 wrote:
KIL

As much as I would like to absorb as much info as possible, I would not want you to compromise your trust with your customers. However, any tid-bit for a Fluke fishing nut case like me would be appreciated. Only do what you think is right, no hassles from me. Good luck with your new shop......Kevin R
Thanks. You releave me. :) I sent you a PM.

Hello, Kil

I am new to the site and I was reading your lot of your message, you're the true fisher man, I been fishing since I was kid, surf fishing and fresh water fishing but I still learning about the fishing, when I saw your statement about Offshore Jigging and Popping, you're the man, I never saw one person knows so much, and sharing and giving information to members, wish I can visit your new shop and learn how to jigging and popping before offshore trip.

please let me have your shop address?, so I can visit you before my first offshore trip on comming october for chunking and jigging for tuna.

Thanks again, Kil(I should call you hyungnim, because you're the true fisher man and you give gooood reputation to Korean)

jay
 

· Registered
Joined
·
12,251 Posts
jaymanc wrote:

Hello, Kil

I am new to the site and I was reading your lot of your message, you're the true fisher man, I been fishing since I was kid, surf fishing and fresh water fishing but I still learning about the fishing, when I saw your statement about Offshore Jigging and Popping, you're the man, I never saw one person knows so much, and sharing and giving information to members, wish I can visit your new shop and learn how to jigging and popping before offshore trip.

please let me have your shop address?, so I can visit you before my first offshore trip on comming october for chunking and jigging for tuna.

Thanks again, Kil(I should call you hyungnim, because you're the true fisher man and you give gooood reputation to Korean)

jay



Jay, I feel jigging and popping community are somewhat different.
I met many new jig fishermen in Texas, NC, MA, RI, NJ an NY this year. Even we met each other for the first time, we are all like old friends. I always tell other fishermen that you really can enjoy fishing if you are not intested in keeping fish too much and most jig fishermen I met like to catch and release and every jig fishermen like to share information and like to learn from others including myself. The most important thing for jig fishermen is to enjoy themselves, not to catch more fish. I am looking forward to seeing you soon and talk about fishing. :)
 

· Registered
Joined
·
12,251 Posts
bellyup1 wrote:
I HEARD KILSONG OPENED UP A SHOP SOMEWHERE IN QUEENS

ANYBODY HAVE THE NAME, ADDRESS AND PHONE NUMBER ? APPRECIATE IT

DOES HE HAVE A WEBSITE OPENED UP YET ? :)
That is false information.
NJ shop is my only shop. If you need some info, pm me.
My shop's ad will be run here and Allcoast soon as soon as my website is working. One potential customer warns me not to go fishing and work on completing shop's website by e-mail yesterday as he was frustrated not to see on my site for long.
But it is prme tuna fishing time. :)

This post edited by KILSONG 05:07 PM 10/09/2008
 
1 - 17 of 17 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top