NorEast Fishing Forum banner
1 - 1 of 4 Posts

· Registered
10,661 Posts


Try different degreasing detergents. Try Simple Green.

If nothing works do you have the facilities to chuck the rod in a lathe?

I use the dry wall sanding sheets to shape eva (synthetic) grips. I cut them into 1/2" or 3/4" strips. Just rotate the rod and remove the top layer of dirt etc.

Capt Neil
1 - 1 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.