NorEast Fishing Forum banner
1 - 2 of 2 Posts

· Registered
Joined
·
764 Posts
Discussion Starter · #1 ·
Anyone have any ideas as to where to buy or how to
inexpensively create a box to go under the bench seat of my
Dual console. I am now using 2 different old tackle boxes, and of
course ALWAYS grab the wrong one first! Max. size would be 32"
x 10" by 9" high, or 36 x10x7.. (An arrow case is close in size.)
Wood warps, and those 1/2" polymer sheets are 50 bucks at
Boatersworld, less any hardware, so making it may not be the
practical option either. I was going to use an old battery box with 4
Plano 3406s inside, but splashing fish and washdown made that
impractical.
 

· Registered
Joined
·
764 Posts
Discussion Starter · #3 ·
Thanks Jerry,
have tried the various stores as you suggested with no luck to date, (although a Christmas wrapping paper box at Kmart may be close !) I have on backorder an arrow case from Cabela's, but it may be a 1/2 inch too long- anyone know how to glue polypropolene back together? Guess I was just shocked at the cost of those polymer sheets. One company offered to do a custom box up of acrylic for about $85. and if anyone else out there is interested will find and/or forward their email. If I can reglue or bond or melt together the polypropolene arrow case (provided it is just too long, I think I am set. Art
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top