NorEast Fishing Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
40 Posts
Discussion Starter · #1 ·
after under wrapping i applied a coat of color presiovior to my under wrap after it dries do i have to apply a light coat of finish to this.
or can i wrap on my guides then apply a nother coat of sealer then do the finish.
I'm a little confussed on this.
 

·
Registered
Joined
·
248 Posts
I always do. I think that it is harder to get finish between the guide feet if you don't make sure that it is covered before the guides go on. It also protects the thread from the guide feet and get the finish in good contact with the blank. The only time that I don't think I would do it is on a thin blank at the tip if I don't want to afftect the action that much.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top