NorEast Fishing Forum banner
1 - 12 of 12 Posts

· Registered
Joined
·
21 Posts
Discussion Starter · #1 ·
Guy's

I'm have to put new canyon lighting on the boat this year, currently I am using halogen floods on the outriggers and two halogens in the ****pit. I would like to get more light and less shadows with little or more power. Does anyone have any suggestions/recommendations?
Thanks,
Capt. Rock
 

· Premium Member
Joined
·
67,033 Posts
Rock,
I'm using five 300 watt halogens mounted on the tower. Two light the water on the sides on the boat, two light the water off the transom and one lights the ****pit. I also have 2 DC lights aimed at the transom that can be turned on for doing fine work, like tying knots.
 

· Registered
Joined
·
21 Posts
Discussion Starter · #3 ·
Mike,

I was told about a new type of fixture that had higher output and required less power to operate than the halogens, but I forgot the type it takes a couple of minutes to warm up but then watch out twice as bright and with twice the water penetration, at least that what I was told.

Capt. Rock
 

· Premium Member
Joined
·
67,033 Posts
Rock,
The only thing I can think of that comes close to meeting that description is metal halide lighting. But its expensive and IMHO not particulaly suitable for boats. The bulbs are large, probably ten times the size of a 300 watt halogen, and, of course, they have to be mounted in some sort of protective housing. Would make for pretty big fixture on a boat. They are often used in parking lots these days.
 

· Registered
Joined
·
786 Posts
IMO, there are two reasons for lighting. 1. To see what teh **** your are doing out there and 2. get bait fish like squid, needle fish, etc. to the boat and net them.

The way fishing has been the last couple of years, the fish have been very picky and on many occasions will only feed on the chunks or live bait outside of the light and/or shadows. I know guys who had plenty of live boat in the live well and shut their quartz lights off and then started to catch fish.

No need to go overboard on lights if you have enough to attract bait. Just my opinion.
 

· Registered
Joined
·
13,099 Posts
Can anyone recommend any good brand 110V Hologen lighting fixtures and where you can get them? I have not seen any in the marine stores I visited, Home Depot has garbage, and Grainger had some pretty expensive stuff that looks very large. I need fixtures that are small, compact, probably 150W's would be fine as well.

Thanks,
Matt
F/V NIKKI ANN
 

· Premium Member
Joined
·
67,033 Posts
Matt,
I usually use the ones from home depot and just consider them throw aways. They typicall last two seasons.

Tog,
Artie Cortez on the Halfback has those pool lights in the bottom of the boat. They do seem to be effective. but I'm pretty leery of cutting more holes in the bottom of my boat!
 

· Registered
Joined
·
13,099 Posts
Mike, thanks, those are the ones I am leaning towards, I just don't like the way they mount, they are designed for 1/2 pipe and I don't have anything existing on my boat that I could tap into. I need to make something to hold them. But for the price, even if they only lasted one season, you can't go wrong.
 

· Premium Member
Joined
·
67,033 Posts
Matt,
FWIW the way I did it was to buy tower release outrigger mounts and then mount a regular outdoor electrical box to the mounts and attach the lights to the box. That way they are adjustable, so you can direct the light to where you want it.
 

· Registered
Joined
·
786 Posts
I use a pair of RAB lights that can bought at any electrical supply store for about $35 each. They have lasted three years so far and show no signs of deteriorating yet.
 
1 - 12 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top