NorEast Fishing Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
10,967 Posts
eddief

Hi,

Is this an expensive rod? If not it could be cheaper to buy another.

A guicky would be to use electrical tape to hold the reel onto the seat.

I would check with your local tackle shop and see if they can fix it.

Normally I would cut thru the reel seat and blank at an angle. This will permit me to put parts together with proper alignment.

Remove old reel seat. Now you need an 8" piece of scrap blank that will fit into the 2 pieces of your rod. This gets complicated. Feel free to call me if you want to continue this process. It is easier to explain on phone or at the Lindenhurst Fishermans Flea Market this Saturday.

(631) 567-8049

Capt Neil

Have Fun Fishing. Capt Neil
Custom Fishing Rods by Captain Neil
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top