Username:
Password:
Get Account    
Login
Home  |  Magazine  |  Reports  |  Discussion  |  Blogs  |  Photos  |  Tides  |  Weather  |  Community  |  Updates  |  Fishing Info  |  Contact

Bob Banfelder

Bob is an award-winning crime-thriller novelist and outdoors writer. "The Fishing Smart Anywhere Handbook for Salt Water & Fresh Water" is endorsed by Lefty Kreh and Angelo Peluso~online at Amazon.

Search This Blog

Recent Comments

Categories

Recent Posts

Archives

 

June 01, 2017

Compact Spinning & Fly-Fishing Kits for Travel ~ Part I

by Bob Banfelder

When researching compact spinning and fly-fishing kits for travel, I was looking for a complete kit that had a dedicated rod and reel for spin fishing as well as a dedicated rod and reel for fly-fishing—not one of those generic, dual-purpose rods that serve as a substitute for both angling methods. That just doesn't cut it. The L.L. Bean Spin/Fly Combo Outfit is the ticket. With compact case dimensions of only 21½-inches long x 8½-inches wide, x 3½-inches high, it is a perfect size for easy carry-on transport, backpacking, or to stow in your vehicle and have at the ready at a moment's notice. How many times have you driven by a promising body of water and said to yourself? Boy, I wish I had my spinning and/or fly-fishing equipment handy. Well, with the L.L. Bean Spin/Fly Combo Outfit, you can now have a pair of completely dedicated compact travel rods and reels on hand for fishing both sweet water and the suds.


L.L. Bean Compact Spin/Fly Kit

The L.L. Bean spinning outfit features a dedicated 4-piece, 6-foot medium/light-action rod that is well-matched to a series 1000 reel. The spool is preloaded with 110 yards of 6-pound test monofilament line—not 60 yards as specified in the description, which I immediately questioned. After carefully measuring then re-spooling, I thought perhaps the reel had been inadvertently spooled with 4-pound test line so as to account for the extra 50 yards of mono, which would happen to agree with their lb. test/yd. spool capacity description; [4/110, 5/100, 6/60 is printed on the skirted spool. I compared the diameter of the line to spools of both 4- and 6-pound test monofilament I had on hand and tactilely determined that it was 6-pound test mono. Granted, there is no universal standard referencing line diameter versus breaking test strength, and I was not about to hunt down a spring balance in order to test tensile stress. In any case, it's better to have more line than less. Later, referencing fly line and backing, we'll see that more line can become an issue. That aside for the moment, the spinning reel has a generous gear ratio of 5.2:1, 4 ball bearings, a smooth drag, and an anti-backlash system.

The fly outfit features a dedicated 6-piece, 8½-foot medium-action 5-weight rod that is nicely matched to their 5–6 weight Angler model #1 reel. Its good-size arbor is pre-spooled with 290 feet of backing, an 84-foot floating fly line (yellow), and a 9½-foot tapered leader. A fluent disc drag sports a large knob in order to easily apply the brakes.


4-Piece Spinning Rod ~ 6-Piece Fly Rod ~ Fly Box ~ Lure Box ~ Carrying Case

Additionally, the pair of rods and reels is protected within a functional vacuum-molded Cordura nylon fabric case with a clear-plastic zippered top. The case is lined with high-density polyurethane foam with cutouts shaped to firmly hold reels, rod sections, along with a pair of miniature lure and fly boxes. The plastic fly box (with slotted foam inserts), which can hold many flies, even contains a trio of easy-to-access fly-fishing hook threaders—great for changing flies in low-light and/or cold conditions. Beneath the boxes, I added packages of tapered leaders and tippet material. Last but not least, the case has a durable Cordura carrying handle.

After stripping out line, casting, and fighting a few fair-sized schoolie bass before finally calling it a day, I noted that the fly line was binding slightly—atop the spool, just beneath the reel seat—even after carefully rewinding the line back upon the spool. Why? The answer is that I wasn't reeling and laying the line precisely and firmly back-and-forth along the spool as when it was first machine spooled at the factory. When I returned home, I simply measured the backing, fly line, and leader so as to determine accurate specs. I then removed 100 feet from 290 feet of backing then retied it to the spool, leaving 190 feet, which is more than sufficient when coupled to 84 feet of fly line and a 9½-foot leader for a total of 283½ feet (94½ yards). In all my years of fly-fishing both salt and fresh water, I rarely went into the backing; when I did, it wasn't more than a few yards. So now, even if I fail to wind the line evenly upon the spool, I'm not going to have a binding issue unless I'm really careless. Also, if I later decide to whip finish a loop and add a weight-forward sinking section, or switch to a longer 100-foot fly line, I'm good to go. L.L. Bean is certainly being generous in giving you more than less rather than the other way around, so I can't fault them in that. In any event, always be sure to allow for enough clearance so as not to damage the fly line.

Referencing the spinning rod, you will note that it does not have a hook keeper. That, too, is an easy fix. As I do not like retaining the hook in the leg of a guide, let alone one of its eyes, or impaled in the rod's fine cork handle, I prefer to secure the hook in a neat little item called The CATCH, manufactured by Adams WW, Inc. I have them attached to virtually every rod I own (spin, bait, and fly) — even if the rod comes with its own hook keeper. You'll note that the fly rod does come with its own hook keeper, yet I still attached The CATCH's compact size hook keeper to the wand. The hook keeper's slotted magnetic shield solidly holds and prevents the point and barb of the hook from catching you, your clothing, vehicle, and boat seats—not to mention, perhaps, a pet. The CATCH hook keepers securely attaches to virtually any size blank diameter in seconds via an ozone and weather-resistant neoprene O-ring. The CATCH lightweight hook keepers are available in three sizes: The CATCH compact size (black, orange, blue), The CATCH-BIG (black), and the CATCH-MEGA (black). http://www.getthecatch.com


Bob B's Big Bull's-Eye Fly & The CATCH Hook Keeper

Over the years, I've field-tested other brand-name hook keepers. For conventional spin, bait, and fly-casting rods, you want the CATCH hook keepers. Pictured below for the purpose of comparison is Fuji's EZ Keeper attached to the L.L. Bean travel spinning rod. The EZ hook keeper attaches in the same fashion as The CATCH hook keepers by way of an O-ring. Though, with the lure's pair of treble hooks exposed, it doesn't really much matter that those points and barbs are unprotected—unlike the single protected point and barb of the fly depicted in The CATCH's magnetic shielded slot. The EZ Keeper serves to hold a lure or fly, not to protect. Also, the EZ Keeper is available but in a single size, whereas the trio of The CATCH compact keepers accommodate hooks from midge-size 22–1, The CATCH-BIG up to 4/0, and The CATCH-MEGA up to 9/0. However, Fuji's EZ Keeper does have its place as a Tenkara line-management system.


Yo-Zuri Crystal 3D Minnow & Fuji EZ Hook Keeper

I first reviewed The CATCH hook keepers in Nor'east Saltwater back in August of 2013. The piece is titled Hooked on Hook Keepers. Click on this link for the complete article: http://www.noreast.com/articles/blog.cfm?b=35&a=4150.

Returning back to the pair of spin and fly-casting rods, both are finely wrapped and finished, boast genuine cork handles, 5 single-foot guides plus tip ~ 1 double-footed guide, 8 snake guides plus tip, respectively. The rods alone are worth the cost of the kit. And although the reels themselves are not of stellar quality—plastic components versus metal being the issue—you can always upgrade those items if and when the time comes while employing those same fine rods and suitably sufficient carrying case for many, many years. Our L.L. Bean compact combo travel kit will serve us at a moment's notice, always at the ready in our vehicle for unexpected, spontaneous adventure and action whenever our beefier equipment is back home taking up space.

In concluding Part 1, the fly reel is more than adequate, and the spinning reel stood up admirably against twenty-plus schoolie bass in a single outing. Moreover, the following day, I lost a nice-size striper (guesstimated at 30 inches) on the travel spinning rod as Donna was fumbling with the net right off the port stern. My point here is not to pick on Donna, but to make clear that the rod and reel easily handled a good-size fish in the suds, right up to the boat, the drag system having performed smoothly and flawlessly. As always, be sure to rinse your rod(s) and reel(s) with fresh water on return. Donna and I have both expensive and inexpensive equipment angling equipment that we have used, not abused, for decades. Take proper care of your equipment, and it will take care of you. Enough said.


L.L. Bean Travel Spinning Outfit ~ Yo-Zuri Crystal 3D Minnow ~ One of a Score of Schoolie Stripers Caught That Day in Our Compact Folding Porta-Bote (www.porta-bote.com.



Bob Banfelder
https://www.robertbanfelder.com

Award-Winning
Crime-Thriller Novelist & Outdoors Writer

Member: Outdoor Writers Association of America
New York State Outdoor Writers Association
Long Island Outdoor Communicators Network

Cablevision TV Host Special Interests with Robert Banfelder & Donna Derasmo

Bi-monthly contributor to Nor'east Saltwater ~ presented on the 1st & 2nd of every month.

Available on Amazon in paperback & -book formats


Available on Amazon in paperback & -book formats

Comments (0)

Post a Comment




You must login to post a comment.
Username:
Password:
remember my password at this computer

Don't have an account? Register Here



2017 Noreast Media, LLC.
Terms under which this service is provided to you.